久久精品免费全国观看国产,亚洲精品久久久www,日韩精品无码人妻一区二区三区

當前位置：上海瑞貝貿易有限公司 > 產品中心 > 試驗粉塵 > 汽車電器環境試驗用試驗粉塵

汽車電器環境試驗用試驗粉塵

產品型號：

class

品牌：

價格電議,您可以向供應商詢價得到該產品價格

所在地：

上海浦東新區

更新日期：

2025-03-28

詳細信息

| 詢價留言

	品牌：*		型號：class		產品規格：2kg
	主要用途：測試粉塵		外觀：粉末		產品規格：2kg

汽車電器環境試驗用試驗粉塵及其要求
產品型號：JIS粉塵
產品特點：美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵，韓國ITC沙塵試驗箱
JIS粉塵汽車電器環境試驗用試驗粉塵及其要求的詳細資料：

美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵韓國ITC沙塵試驗箱ISO 12103-1 A1 Ultrafine Test Dust；ISO 12103-1 A2 Fine Test Dust；ISO 12103-1 A3 Medium Test Dust ISO 12103-1；A4 Coarse Test Dust
5.8.1 Dust Tests.粉塵測試

目的:用來確定當有風沙和路面灰塵干擾時,附件能否提供充分的保護使得DUT繼續達到CTS中所指明的運行要求。

過程(操作方式1.2)：測試根據ISO20653針對水等物體的防護。測試須使用ISO12103-1,A2優良等級，同時，粉塵需持續8個小時。

標準：功能狀態須為A級

DUT應避免受損,破壞功能,或降解其性能。DUT在清潔前須通過功能/參數測試。

0微米至指定尺寸的等級
名義尺寸范圍 (µm)	材料品種
0 –5	Fe2O3 (Hematite，赤鐵礦) Fe3O4 (Magnetite，磁鐵礦)
0 – 10	Fe2O3 (Hematite，赤鐵礦) Fe3O4 (Magnetite，磁鐵礦)
可接受的尺寸范圍是指0微米至指定的尺寸產品中，指定至少包含指定尺寸的顆粒的體積百分為96%。

中等級別產品

名義尺寸范圍
(µm)

材料品種

5 – 10

Fe2O3 (Hematite，赤鐵礦)
Fe3O4
(Magnetite，磁鐵礦)

中等級氧化鐵產品按體積百分比計算，至少包含80%上面指定的尺寸的顆粒。

0微米至指定尺寸的等級
名義尺寸范圍 (µm)	材料品種
0 – 5	Fe2O3 (Hematite，赤鐵礦)Fe3O4 (Magnetite，磁鐵礦)
0 – 10	Fe2O3 (Hematite，赤鐵礦)Fe3O4 (Magnetite，磁鐵礦)
可接受的尺寸范圍是指0微米至指定的尺寸產品中，指定至少包含指定尺寸的顆粒的體積百分為96%。

中等級別產品
名義尺寸范圍(µm)	材料品種
5 – 10	Fe2O3 (Hematite，赤鐵礦)Fe3O4 (Magnetite，磁鐵礦)
中等級氧化鐵產品按體積百分比計算，至少包含80%上面指定的尺寸的顆粒。

美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵，韓國ITC沙塵試驗箱
品牌: 美國PTI
型號:ISO12103-1 A1 Ultra
ISO 12103-1 A1 Ultrafine Test Dust A1粉
PTI 是具備ISO 等級試驗粉塵及特殊定制粉塵分布的領先制造商和經銷商。具體請閱讀：“試驗粉塵的歷史”來了解PTI在生產ISO12103-1標準中規定的4個等級試驗粉塵的角色。*的工程技術，良好的發展狀態，保密產權程序的實施，徹底的分析調查及每個階段材料處理的評估都讓PTI對其客戶無論從競爭者或增值服務都脫穎而出。

典型的化學成分分析

化學成分	重量百分比	化學成分	重量百分比
Si02	68 - 76	Ca0	2.0 - 5.0
Al203	10 - 15	Mg0	1.0 - 2.0
Fe203	2 - 5	Ti02	0.5 - 1.0
Na20	2 - 4	K20	2.0 - 5.0

*Loss on Ignition 2 – 5%

ISO 試驗粉塵顆粒分布(體積百分比小于)

尺寸(微米)	ISO 12103-1, A1 超細試驗粉塵
1	1.0 – 3.0
2	9.0 – 13.0
3	21.0 – 27.0
4	36.0 – 44.0
5	56.0 – 64.0
7	83.0 – 88.0
10	97.0 – 100
20	100
40	--
80	--
120	--

PTI粉塵灰灰塵ACFTD灰塵ISO 12103-1 A2 Fine Test Dust A2粉 ISO 12103-1 A4 Coarse Test Dust A4粉 ISO 12103-1 A3 Medium Test Dust A3粉MTD粉塵 Arizona Test Dust Fractions 亞利桑那試驗粉塵MIL 810E4 Silica Sand & Dust Iron Oxide 波特蘭水泥 Type I Glass Beads 玻璃珠 PV 樹脂(噴融樹脂) 汽車安全帶測試粉塵ECE R16, Section 7.6.3.2 (GB 14166, Section 5.6.3.2液SoftC-2A Quartzose Mineral Dust DMT emission test dust (IEC 60312 5.1.2.5) Test Dust Type 8® DMT test dust type 8 (IEC 60312 5.1.2.3) Quartzose Mineral DMT carpet test dust (IEC 60312 5.1.2.2) DMT Dolomite Sand (IEC 60312 5.1.2.1)A2 ISO 細灰 A4粗灰亞利桑那沙子亞利桑那試驗粉塵美國ISO MTD粉塵A2測試粉A3中級試驗粉塵AC DUST A2 粉塵 ISO 試驗粉塵亞力桑那A2粉塵美國PTI碳黑粉塵 ISO 12103-2 M2鋁粉 A2 ISO 細灰 ISO 12103-2 M3鋁粉 ISO 12103-2 M4鋁粉ISO 12103-2 M5鋁粉JIS CLASS 2級粉塵 PTI 粉塵Nominal 0-5 Arizona Test Dust PTI 粉塵Nominal 10-20 Arizona Test Dust PTI 粗粉 PTI 粉塵Nominal 20-40 Arizona Test Dust 試驗用粉塵12103-1 A2類粗粉粗灰美國亞利桑那A1粉 FLY ASH 飛灰Portland Cement波特蘭水泥美國亞利桑那M5粉APPIE JIS Z 8901 CLASS 1 試驗粉塵APPIE JIS試驗用粉體1 8種APPIE關東粉APPIE JIS test powders 1 class8 日本粉體工業技術協會APPIE APPIE JIS Z 8901 試驗用粉體1，CLASS 8 APPIE JIS Z 8901 CLASS 15粉塵COTTON LINTERS 棉花纖維鐵粉(赤)氧化鐵 Carbon Black炭黑Ashrae test dust with carbon black 試験用粉體１の7種, 8種, 11種JIS粉塵是依據JIS(Japanese Industrial Standard，即日本工業標準)生產的試驗粉塵，常被用于一些日系產品的檢測。本公司可為廣大國內用戶提供日本進口的下述檢測雜質，包括JIS Z 8901的試驗粉塵和玻璃珠產品；請在與我們聯系的時候描述清楚您需要的是下面哪種產品Quartz sand Talc Fly ash KANTO (Japanese) loam Carbon black Calcium- carbonate (heavy) Glass beads GBL type Glass beads GBM type White fused alumina JIS Z8901 1 種(硅砂) JIS Z8901 3 種(硅砂)JIS Z8901 4 種(滑石粉)JIS Z8901 7 種(關東粉)JIS Z8901 8 種(關東粉)鐵粉0-5微米Fe₃O₄鐵粉(赤)0-5微米Fe₂O₃鐵粉(赤)5-10微米Fe₂O₃棉花纖維COTTON LINTERS
美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵，韓國ITC沙塵試驗箱

我司代理的美國PTI試驗粉塵應用在包括濾清器行業，電子行業等；德國DMT試驗粉塵對于房屋通風系統過濾器應用比較廣泛；而日本JIS試驗粉塵的也應用在濾清器行業和電子行業；下表列出了來自美國PTI公司***網站的常用的濾清器行業檢測標準；

Filtration Standards, & Specifications	Contaminants Required	Comments & Information
ANSI B93.31: Multipass Method for Evaluating the Filtration Performance of a Fine Hydraulic Fluid Power Element	ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per standard is obsolete)	B93.31: Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the ANSI B93.31 & NFPA T3.10.8.8 documents
ISO 4020: Road Vehicles - Fuel Filters for Diesel Engines	ISO 12103-2, M1 and M2 Aluminum Oxide Test Dusts	An Organic Contaminant is also required, see 4020 standard for details.
ISO 4548-4: Initial Particle Retention Efficiency, Life & Cumulative Efficiency (gravimetric method)	ISO 12103-1,A2 Fine Test Dust ISO 12103-2, M2, M3, M4 and M5 Aluminum Oxide Test Dust	Life & Cumulative Efficiency uses A2 Fine Test Dust Initial Particle Retention uses M series of Aluminum Oxide Test Dust
ISO 4548-12: Filtration Efficiency using Particle Counting, & Contaminant Retention Capacity	ISO 12103-1, A3 Medium Test Dust	SAE J 1858 Oil Filter Multipass Method is cancelled. ISO 4548-12 has been adopted by SAE
ISO 4572: Hydraulic Fluid Power-Filters - Multipass Method	ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per std. is obsolete)	SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE
ISO/TS 11155-1: Road Vehicles - Air Filters for Passenger Compartments Part 1: Test for Particulate Filtration	ISO 12103-1, A2 Fine Test Dust	SAE J 1669-1: Cabin Particulate cancelled.ISO/TS 11155-1 has been adopted by SAE
ISO/TS 13353: Diesel Fuel & Petrol Filters for Internal Combustion Engines - Initial Efficiency by Particle Counting	ISO 12103-1, A3 Medium Test Dust	ISO/TS 13353 is cancelled & withdrawn. ISO 19438 has replaced 13353
ISO 16889: Hydraulic Fluid Power Filters - Multipass Method for Evaluating Filtration Performance of a Filter Element.	ISO 12103-1, A3 Medium Test Dust	ISO 16889 has replaced 4572 Hydraulic Filter Multipass Test Method
ISO 19438: Diesel Fuel & Petrol Filters for Internal Combustion Engines - Filtration Efficiency using Particle Counting & Contaminant Retention Capacity	ISO 12103-1, A3 Medium Test Dust	ISO 19438 has replaced 13353 Fuel Filter Initial Efficiency
ISO/CD19713: Inlet Air Cleaning Equipment for Internal Combustion Engines & Compressors -Fractional Efficiency Testing	ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust	This Standard is under development by ISO/TC22/SC7/WG3 Air & Oil Filters
JIS D1608: Fuel Filter Test Method for Automotive Gasoline Engines	JIS Z 8901, Class 8 (fine) Test Dust	ISO 12103-1, A2 Fine Test Dust may be substituted if listed in test report and/or with customer agreement
JIS D1611: Automotive Parts - Test Methods of Lubricating Oil Filters	SOFTC-2A	Gravimetric Test Method
JIS D1617: Automotive Parts - Fuel Filters for Diesel Engines Test Methods	An Organic Contaminant is also required, see D1617 standard for detail. ISO 12103-2Aluminum Oxide Test Dusts JIS Z 8901 Class 8 (fine) Test Dust	ISO 12103-1, A2 Fine Test Dust may be substituted for JIS Z 8901 Class 8 Test Dust if listed in test report and/or with customer agreement
NFPA T3.10.8.8: Hydraulic Fluid Power-Filters - Multipass Method for Evaluating Filtration Performance	ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per standard is obsolete)	T3.10.8.8 Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the NFPA & ANSI B93.31 documents
SAE J 726: Air Cleaner Test Code	ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust	SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE
SAE HS- 806: Oil Filter Test Procedure Section 6: Filter Capacity & Contaminant Removal Characteristics of Full-Flow Oil Filters	ISO 12103-1, A2 Fine Test Dust SOFTC 2A	Gravimetric Test Method for Overall Efficiency & Capacity
SAE HS- 806: Oil Filter Test Procedure Section 7: Single Pass Particle Retention Capability Test	Broad Range within 29-470 μm of glass beads Narrow Range in 10 μm fractions of glass beads Natural ISO 12103-1, A4 Coarse Test Dust in full range or fractions thereof	Gravimetric Test Method for Single Pass Efficiency
SAE J 905: Fuel Filter Test Methods	ISO 12103-1, A2 Fine Test Dust	Gravimetric Test Method for Efficiency & Capacity
SAE J 1669-1: Passenger Compartment Air Filter Test Code - Particulate Filtration	ISO 12103-1, A2 Fine Test Dust	SAE J 1669-1 is cancelled.ISO 11155-1 has been adopted by SAE
SAE J 1858: Full-Flow Lubricating Oil Filters Multipass Method for Evaluating Filtration Performance	ISO 12103-1, A3 Medium Test Dust	SAE J 1858 is cancelled.ISO 4548-12 has been adopted by SAE
SAE J 1985: Fuel Filters - Initial Single Pass Efficiency Test Method	ISO 12103-1, A2 Fine Test Dust	Particle Counting Fuel Filter Test Method- Fractional Efficiency

產品搜索
產品分類
留言
- 聯系人：丁女士
- 電　話：13801662380
- 郵　編：201204
- 地　址：上海市浦東新區滬南路2218號東樓1812房間
- 網　址： https://shrbmy.cn.goepe.com/
  http://www.df96296.com

汽車電器環境試驗用試驗粉塵

產品搜索

產品分類

實驗室儀器與耗品

試驗粉塵

美國Duke粒子

美國進口粒子

英國迪康90清洗液

醫藥檢測儀

桔皮板/腐蝕片

老化試驗機

留言

汽車電器環境試驗用試驗粉塵

產品搜索

產品分類

留 言

留言